Seal & Bond MS 24 ICE
FOOD CERTIFIED SEALANT CAPABLE OF CURING AT LOW TEMPERATURES
Cures at temperatures as low as -20°C
EC 1935 and LFGB certification for use in food production
Free from allergens and ADI (animal derived ingredients)
Very low emissions (Emicode EC1+)
Remains flexible, even at negative temperatures
Paintable
General info
Why is it perfect for experts?
Features
- MS24 ICE has the unique characteristic that it cures even at extremely low temperatures. This makes working or carrying out repairs in winter conditions, or in cold storage possible, without having to heat those spaces up, which means huge energy and time savings.
- MS24 ICE remains flexible. The high movement capability (25%) and low modulus of elasticity (0.5 N/mm²) make it a good choice for all seals that are subject to high thermal and/or hygric expansion and shrinkage, or for absorbing mechanical vibrations. The MS polymer basis is what makes MS24 ICE adhere well to most building materials.
- Thanks to the EC1935 and LFGB food certification, it is possible to use the product in areas where food production takes place. This certification offers a higher degree of food safety than the current NSF P1 certification, which – despite what is often assumed – does not allow use in production areas. MS24 ICE is certified for incidental direct contact with food.
- MS24 ICE has very low emissions (Emicode EC1+) and does not contain any harmful, hormone disrupting or allergenic substances.
Why use Seal & Bond MS 24 ICE ?
- Expansion joints in vertical applications, both inside and outside
- Sealing of connection and expansion joints at negative temperatures
- Sealing of connection joints in cold stores and freezing rooms
- Sealing of HVAC applications
- Sealing of service ducts in cold stores and freezing rooms
Instructions
- Product temperature between +5°C and +40°C.
- Apply on a clean substrate, free of snow and ice, if necessary clean with Safety Clean and/or Multifoam. FS version if required.
Due to the wide variety of different plastic materials and compositions, as well as materials that are prone to stress cracking, preliminary trials are recommended (plastics, powder coatings, exotic woods and bituminous materials). Do not use on natural stone and not as window seal. First strengthen weak and/ or porous surfaces with Fixapox.
Due to the diversity of varnishes and paints on the market we recommend preliminary tests. Using products based on alkyd resins may delay the drying process. Use Safety Clean for the perfect finishing and for the removal of uncured Novatio polymers. Use Novakleen for finishing on porous materials.
Technical information
FOOD CERTIFIED SEALANT CAPABLE OF CURING AT LOW TEMPERATURES
- Basis: hybrid MS polymer.
- Color: white.
- Odour: neutral.
- Shore A hardness (DIN 53505): 24.
- E-modulus 100% elongation (DIN 53504 S2): +/- 0.5 N/mm².
- Elongation at break (DIN 53504 S2): +/- 500%.
- Elastic recovery (DIN EN ISO 7389): ≥ 70%.
- Tensile strength (DIN 53504 S2): +/- 0.7 N/mm².
- Movement capability: 25%.
- Consistency (DIN EN ISO 7390): stable to ≤ 3 mm.
- Curing: polymerization by air humidity.
- Application temperature: ambient: from -20°C to +40°C: product: from +5°C to +40°C.
- Skin formation at 23°C/50% RH: max. 30 min.
- Curing (mm):
- at 23°C and 50% R.V.:
- after 1 day: 2,3mm.
- after 2 days: 3,3mm.
- after 7 days: 6,2mm.
- at +5°C and 50% R.V.:
- after 1 day: 1,7mm.
- after 2 days: 2,5mm.
- after 7 days: 4,4mm.
- at -20°C and 0% R.V.:
- after 1 day: 0,7mm.
- after 2 days: 1,2mm.
- after 7 days: 1,4mm.
- Shrinkage (DIN EN ISO 10563): ≤ 3%.
- Paintable: yes.
- Density at 23°C and 50% R.V.: 1,53 ± 0.05 g/cm³.
- Post-curing chemical resistance: :
- good: water, aliphatic solvents, oils, greases, diluted organic acids and alkalis.
- moderate: esters, ketones and aromatics.
- not resistant to: concentrated acids and chlorinated hydrocarbons.
- Temperature resistance: -40°C to +90°C.
- Frost resistance: to -20°C during transport.
- Shelf life: 12 months, in original packaging stored in cool, dry evnvironment.