Seal & Bond MS 40 Alu
ALUMINIUM COLORED SEALING KIT WlTH TRANSPARENT FLOW
Adjusts perfectly to all grey metals.
Can be used on moist surfaces.
Anti-fungal and bactericidal.
Ideal for sealing metal and grey colored natural stone combinations.
Does not make any stains on natural stone.
Comes with a practical and twistable nozzle.
Cures fast.
Stays elastic.
General info
Why is it perfect for experts?
Features
Because of the special combination of transparent hybrid MS Polymers and aluminium pigments you can always get the fit color on grey metals. When Seal & Bond MS 40 Alu is applied in a thick layer, it gets an Alu-stainless steel color. When applied is a thin layer, it becomes transparent. Seal & Bond MS 40 Alu can be used on moist surfaces. Seal & Bons MS 40 Alu cures fast and stays elastic. Can be used for both elastic fixing and sealing.
Why use Seal & Bond MS 40 Alu ?
- The only ALU/stainless steel colored kit that, when applied in a thin layer becomes transparent and is clear enough to have the color of the underlying materials shine through.
- A very good bonding on most current construction materials. Because of this it can also be used for the combination of metal with other construction materials.
Instructions
- Processing temperature: from +5°C to +40°C.
- Apply to clean, dust and grease-free substrate, if necessary clean with Safety Clean and/or Multifoam.
- Apply with manual or air caulking gun (best with telescopic plunger).
- Due to the wide variety of different plastic materials and compositions, as well as materials that are prone to stress cracking, preliminary trials are recommended. Test the adhesion to plastics, powder coatings, exotic woods and bituminous materials.
- Start by strengthening weak and/or porous substrates with Fixapox.
- Due to the diversity of varnishes and paints on the market we recommend preliminary tests. Using products based on alkyd resins may delay the drying process.
- Use Safety Clean to clean and degrease safely, obtain the perfect finish, and to remove uncured Novatio polymers. Use Novakleen pH9 to finish porous materials.
- When glueing mirrors in sanitary facilities only apply vertical strips of adhesive to avoid stagnant moisture due to condensation.
- Ideal adhesive thickness for optimal adhesion strength: 3 mm.
Technical information
ALUMINIUM COLORED SEALING KIT WlTH TRANSPARENT FLOW
- Base: MS polymers.
- Color: aluminium/transparent.
- Smell: neutral.
- Flow: 5 bar / 3 mm / 23°C 160 g/min.
- Skin cure: 23°C 50% R.V. 5 minutes.
- Non-adhering: 23°C 50% R.V. 40 minutes.
- Full cure time: 23°C 50% R.V. 24 u - 4 mm, 48 u - 5 mm, 72 u - 8 mm.
- Max. allowable deformation: 20% (acc. ISO 9046).
- Expansion joint: ISO 11600 F 20% HM E.
- Hardness - DIN 53505:40 Shore A.
- Tensile strength: 220 N/cm².
- Tear strength - DIN 53507: ca. 40N/cm².
- Thermal stability: -30°C to +95°C. Peak: 155°C max. 30 min.
- Volume shrinkage after cure: < 2%.
- Bonding: excellent on tiles, cement, natural stone, wood, concrete, aluminium; on PP, PE, PTFE and bitumen no bonding guaranteed.
- Elongation after fracture - DIN 53504: > 250%.
- Colour invariability: colour change can becaused by external circumstances.
- Can be repainted: OK with most solvent- and waterbased lacquers.
- Application temperature: from +5°C up to+40°C.
- Chemical resistance:
- good: water, seawater, aliphatic solvents, oils, greases, dilutedorganic acids, lyes;
- moderate: esters, ketones, aromatics;
- bad: concentrated acids, chlorinated solvents, swimming pool water.
- Shelf life: 12 months, keep dry, cool and frost-free.
- Safety measures: consult the Safety Data Sheet.
